Scarab OG
(Gun metal)
(Yellow LED)
The Scarab OG is the Mod that started it all.
The most versatile and widely bought Scarab Box Mod on the market. It has the
size to comfortably fit a 2200mah 3 cell battery but also the sleekness to fit
into almost anyone's hands. The Scarab OG has the same 3500w chip set as all
the other Scarab Box Mods but with more punch and battery life than the Scarab
Mini. If the Mini Bertha is a little large for you taste but the Scarab Mini is
a little small then this one is the one for you!
Tech Spec:
510: V4
These are rated for 2000 watt builds but have been tested out at
3500w
Springs, nuts and solder tabs made from high-copper brass with
jewellery grade plating for maintenance free operations. Waterproof design so
that the juice does not seep into your mod.
Centre pin made from 99.7% conductive copper alloy.
Button:
12mm tactile switch with reduced click sound. Firmer push to
minimize unintentional firing and an easy to press button.
Designed in USA manufactured in china from the group up for use
exclusively on box mods.
Connector:
The connectors we use are XT60 connectors. Perfect for the
application, they have a strong grab and hold feature as well as being safe not
allowing open connectors for hard shorting.
Wire:
Thin jacket silicon wires at 14AWG
Designed and manufactured specifically for box mods. This was
manufactured per our specification for the best flexibility and space
utilisation since we use tighter spacing for our builds.
All wire is silver strand wire, offering the lowest voltage drop
possible.
Chip set:
We use specially made pwm chip set. Designed to handle a
total of 3500w. The chipset also includes mofset protection and a 10k ohm
potentiometer.
Each Scarab Box Mod will come as a
complete package; this will include either a 3S or 4S cell (depending on mod)
and an Imax B6 Compact charger.
Each Scarab Box mod comes complete
and ready to use and is supplied with a lifetime warranty.
IMAX B6 Charger:
This charger charges 2S to 6S LiPo and 1 to 15 cell NiMH battery
packs with just the press of a button. Everything is automatic, so there’s no
complicated guesswork. You get a safe, high quality charge every time. It’s the
easiest charger you’ll ever use!
Features:
- Automatic detection of battery cell count and capacity
- Automatically sets charge output
- Integrated cell voltage balancer for Lipo batteries
- Highly accurate LiPo Balance charging+/-0.01V
- High-power, high performance charge circuit
- XH-Style LiPo balance ports
Operation:
1. Connect the charger to its power source, using either the AC
power cord or the DC power cord provided. When connected to power, the charger
will make a single audible tone and the LiPo Status LED will illuminate green.
When connecting to a DC power source, make sure to observe connect
polarity-red to positive and black to negative. Do not connect both power
inputs to the charger at the same time!
2. Plug the output power adapter cord into the output power ports
of the charger, making sure to observe correct polarity (red to red and black
to black).
3. Plug your battery into the output power adapter cord. If you’re
charging a LiPo battery, plug its balance connector into the matching balance
port on the charger, too.
Depending on the power connector on your battery, you may need to
use an adapter or change the connector to match. In addition, if your LiPo
battery does not feature an XH balance connector, an adapter board can be used.
Specifications:
- Power Input Voltage: DC 11 to 18V/AC 100 to 240V
- LiPo Charge Rate: Up to 5.0 Amps (50 Watts Max)
- NiMH Charge Rate: Up to 5.0 Amps (50 Watts Max)
- Power Output: 50 Watts
- Charge Rate: Up to 1.5C
- Battery Type: LiPo 2S to 6S (Series)/NiMH 1 to 15 Cells
What’s In the Box:
- iMaxRC B6AC Compact Charger
- UK 3 pin AC Input Cord
- DC Input Cord
- XT60 Connector Output Cord
- Deans Connector Output Cord
- Instruction manual
Scarab OG 3s LiPo (Gun Metal)
- Product Code: Scarab OG
- Availability: Out Of Stock
-
£249.99
Tags: Scarab OG, Scarab, High Power Mod